Digital solar circuit controller BASIC HE+ for thermal solar systems

System controller SOLAREG II BASIC HE + for thermal solar systems is one Solar differential temperature controller with large LCD display.
The device has three inputs, one outputs and is supplied with two probes.
Programmable.

The SOLAREG II BASIC HE+ controllers are powerful microprocessor-controlled
Control devices for function control of solar thermal systems with highly efficient Solar pumps.
SOLAREG II BASIC HE+ perfectly controls solar systems
with one collector array and one storage tank. The controllers are designed for use in
dry rooms, in residential, commercial and industrial areas.
Improper use is to be checked against the applicable regulations before
commissioning.

Technical data
- Operating voltage: AC 230 Volt, 50 Hz, -10 to +15%
- Standby losses: 0.5 W
- Output: Electronic semiconductor relay, 230 V AC, 50 Hz,
min. 10 mA, max. 1 A, with cos φ >=0.9
- Control output for HE pumps:
PWM signal: 100 Hz, ViL < 0.5 V DC, ViH > 9 V DC, 10 mA max.
- Analogue signal: 0 ...+10 V DC +/- 3%, 10 mA max.
- Total power of all outputs: max. 300 W
- Inputs: Temperature inputs with fine overvoltage protection for temperature sensor PT 1000, measuring range: -30°C to +250°C
- Fuse protection: Fine-wire fuse 5 × 20 mm, 2 A/T (2 amps, slow-blow)
- Ambient temperature: 0 to +40°C
- Storage temperature: -10 to +60°C
- Housing material: 100% recyclable ABS housing
- Dimensions: L x W x D in mm 175 × 134 × 56
- Protection class: IP20 according to DIN 40050, EN 60529

All advantages at a glance
+ Clear operating menus with graphic symbols and four operating keys.
+ 1 predefined solar scheme - 1 collector array, 1 storage tank or swimming pool.
+ Intelligent speed control.
+ drain-back function.
+ holiday circuit (recooling).
+ protection functions:
* system protection
* collector protection
* flow monitoring.
+ service and status messages by flashing symbols in the display.
+ manual operation.
+ storage of all values even in case of power failure.

1 Output 230V AC.
1 control output for HE pump PWM or analog.
3 temperature inputs PT1000.

dimensions:
Length: 176.0 mm
Height: 134.0 mm
Depth: 56.0 mm

Approval and marking: CE
Weight: 0.715 kg
Scope of delivery:
- Solareg II, model Basic HE+
- 2 temperature sensors PT 1000
- operating instructions

The operating instructions with the technical data can be found in "Media".

Link to the product: https://prozeda.de/product-details/basic-he-plus/