SpiroVent Solar is an air separator for solar or high temperature systems, made of brass.
Automatically closes the vent valve below the evaporation temperature using patented bimetal technology.
Optimum protection against evaporation.
For the continuous removal of air and micro air bubbles from solar circuits.
Medium water and water/glycol (50/50%).Brass finish body.
Degassing through the Spiro tube insert down to a residual air content of 0.4 percent.
Venting with non-lockable permanent venting valve.
=== Manufacturer's guarantee: 5 years ===
Technical specifications:
Nominal width: 22 mm
Pipe connection: compression ring connection
Housing: brass
Installation length: 106 mm
Max. Permissible operating pressure: 10 bar
Max. Flow temperature: 180°C
Max. Throughput volume: 1,3 m³/h
Flow rate : Pressure loss
0,50 m/s 0,34 kPa
0,75 m/s 0,74 kPa
1,00 m/s 1,35 kPa
Content: 0,18 Liter
Weight: 1,2 kg
Optional:
SpiroVent - finished insulation half-shells made of heat-stabilized
EPP rigid foam according to HeizAnlV and EnEV.
Installation of the Spirovent micro-air bubble separator
Notice: Installation only in a vertical position.
You can find the data sheet in "Media".
Link to the product:
https://www.spirotech.de/produkte/solar-produkte/spirovent-solar--messing--hor--autoclose--hohet-157/