10.0 m insulated corrugated pipe made of stainless steel 1.4404 (Aisi 316L, V4A, Nirosta 4404)
with integrated fleece layer.
Including matching assembly set 3/4 "consisting of four union nuts, four segment rings and four graphite seals novapress MULTI II.
The sensor line SiZ 2x0.5 mm² is pre-installed
and draws the return line which is heat-resistant up to 220°C .
Specifications insulation:
Insulation layer thickness approx. 14mm
made of EPDM (ethylene propylene diene)
with foil coating
integrated 4.0 mm thick fleece insulation ( total insulation thickness 18.0 mm )
Self-extinguishing and non-dripping (DIN 4101-B2)
Water vapor diffusion resistance factor μ ≥ 4000 (DIN EN 13469)
Insulation specifications:
Insulation thickness approximately 14,0 mm
made of EPDM (ethylene-propylene-diene)
with foil wrapping
Self-extinguishing and non-dripping (DIN 4101-B2)
Water vapor diffusion resistance factor μ ≥ 4000 (DIN EN 13469)
Specifications corrugated stainless steel pipe:
Inner tube Ø* - 15,6 mm
Pipe outside Ø* - 20,8 mm
Wall thickness - 0,18 mm
Water content - 0,264 liters / meter
Heat exchange surface* - 0,112 m²
Operating pressure - up to 10 bar
*Tolerance - ± 0,5 mm