Deutsch
English
Scald protection kit with integrated thermostatic mixer and a Wilo Yonos Para Z15 / 7.0-RKS FSM circulation pump.
Use: in thermal solar and heating systems for hot water supply.
The kit contains the following components:
2) Circulation pump
3) Check valve
4) Ball valve
5) Ball valve with built-in check valve
6) Mounting bracket
Technical specifications
Maximum operating temperature: 90°C
Minimum operating temperature: -20°C*
Setting temperature range: 30-55°C
Maximum operating pressure: 10 bar
Fittings: see dimensions
(*) provided that the liquid remains in the liquid state
Before installation
Before you proceed, make sure of the following:
- The kit contains all components described in the drawing,
- The components show no signs of damage due to improper transport and / or storage,
- The setting of the mixing valve corresponds to the information in the system specifications.
It is then possible to install the device in the system using suitable tools.
The tightening torque must be suitable to ensure correct tightness without causing
damage to the device. After completing the installation, check all seals in accordance with the
technical standards and/or the applicable laws of the country of installation.
Firma ThermoSon, Dimitre Stoianov cannot be held responsible for breakdowns and/or accidents if the
installation is not carried out in accordance with the applicable technical and scientific standards,
manuals, catalogs and/or relevant technical instructions.
Link to product: https://www.tiemme.com/deu/contabilizzazione/4738kr_contabilizzazione-det_9299.php
Use: in thermal solar and heating systems for hot water supply.
The kit contains the following components:
2) Circulation pump
3) Check valve
4) Ball valve
5) Ball valve with built-in check valve
6) Mounting bracket
Technical specifications
Maximum operating temperature: 90°C
Minimum operating temperature: -20°C*
Setting temperature range: 30-55°C
Maximum operating pressure: 10 bar
Fittings: see dimensions
(*) provided that the liquid remains in the liquid state
Before installation
Before you proceed, make sure of the following:
- The kit contains all components described in the drawing,
- The components show no signs of damage due to improper transport and / or storage,
- The setting of the mixing valve corresponds to the information in the system specifications.
It is then possible to install the device in the system using suitable tools.
The tightening torque must be suitable to ensure correct tightness without causing
damage to the device. After completing the installation, check all seals in accordance with the
technical standards and/or the applicable laws of the country of installation.
Firma ThermoSon, Dimitre Stoianov cannot be held responsible for breakdowns and/or accidents if the
installation is not carried out in accordance with the applicable technical and scientific standards,
manuals, catalogs and/or relevant technical instructions.
Link to product: https://www.tiemme.com/deu/contabilizzazione/4738kr_contabilizzazione-det_9299.php